There will be about 0. 05 ~ 0.1 mm interlayer step effect on the surface of the formed parts manufactured by the Stereolithography Apparatus (SLA), and it will affect the appearance and quality of ...
SLA technology, known as Stereo lithography Appearance, uses a laser to focus on the surface of a light-cured material, causing it to solidify sequentially from point to line and from line to surfa...
As the two most common 3D printing processes, FDM and SLA printing are widely used in different industrial fields.
FDM is a 3D printing technology based on the principle of melt deposition, which u...
Electron Beam Melting (EBM)
Electron Beam Selective Melting (EBSM) Principle
Similar to laser selective sintering and Selective Laser Melting processes, electron beam selective melting technology...
Selective Laser Sintering (SLS) is a powerful 3D printing technology that belongs to the family of powder bed fusion processes, which can produce highly accurate and durable parts that can be used ...
SLS (Selective Laser Sintering) printing was invented by C.R. Decherd of the University of Texas at Austin.It is one of the 3D printing technologies with the most complex forming principles, the hi...