Nylons are a common class of plastics that have been around since the 1930s. They are a polyamide polymer traditionally used in a number of common plastic manufacturing processes for plastic films,...
JSADD 3D is a rapid prototyping service provider providing users with CNC Machining services. The commonly used metal materials for CNC machining are described below.
CNC processing normally refers...
After the prototype has been formed in the liquid resin, the lifting table lifts it out of the liquid and removes it and starts the post-treatment such as finishing and sanding. A thin spatula is i...
Introduction of SLA 3D Printing Service
SLA, stereolithography, falls under the polymerisation category of 3D printing. A laser beam outlines the first layer of an object’s shape on the surf...
SLA technology, known as Stereo lithography Appearance, uses a laser to focus on the surface of a light-cured material, causing it to solidify sequentially from point to line and from line to surfa...
The hardware part of the light curing forming system is mainly composed of laser, optical path system (component 1-6 in Figure), scanning irradiation system (component 7 in Figure) and layering cur...