Fasalka ugu sarreeya ee Vacuum kabka TPU

Fasalka Sare ee Walaxda Vacuum tuurista TPU Sawirka sifaysan

Sharaxaad Gaaban:

Hei-Cast 8400 iyo 8400N waa 3 nooc oo ah elastomer polyurethane oo loo isticmaalo codsiyada qaabaynta faakuumka kuwaas oo leh sifooyinka soo socda:

(1) Iyada oo la adeegsanayo "Qaybta C" ee qaabeynta, wax kasta oo adag oo ka mid ah nooca A10 ~ 90 waa la heli karaa / la dooran karaa.
(2) Hei-Cast 8400 iyo 8400N waxay ku hooseeyaan viscosity waxayna muujinayaan hanti socod aad u wanaagsan.
(3) Hei-Cast 8400 iyo 8400N ayaa si fiican u daaweeyay oo muujiya barti soo laabasho oo heersare ah.

Email noogu soo dir Soo Dejinta Xaashida Xogta

Faahfaahinta Alaabta

Tags Product

Guryaha aasaasiga ah

Shayga		Qiimaha		Hadallo
Alaabta		8400	8400N
Muuqashada	A Comp.	Madow	Cad, midab lahayn	Polyol (Barafka ka hooseeya 15°C)
	B Comp.	Jaale cad, cirro leh		Isocyanate
	C Comp.	Jaale cad, cirro leh		Polyol
Midabka maqaalka		Madow	Caanaha cad	Midabka caadiga ah waa madow
Viscosity (mPa.s 25°C)	A Comp.	630	600	Viscometer nooca BM
	B Comp.	40
	C Comp.	1100
Cufis-jiidad gaar ah (25°C)	A Comp.	1.11		Hydrometer-ka caadiga ah
	B Comp.	1.17
	C Comp.	0.98
Nolosha dheriga	25°C	6 daq.		Resin 100 g
		6 daq.		Resin 300 g
	35°C	3 daqiiqo		Resin 100 g

Xusuusin: Qayb ka mid ah waxay barafaysaa heerkul ka hooseeya 15°C.Ku dhalaali adoo kululeynaya oo isticmaal ka dib markaad si fiican u ruxdo.

3.Alaabooyinka aasaasiga ah ee jirka ≪A90・A80・A70・A60≫

Saamiga isku dhafka	A:B:C	100:100:0	100:100:50	100:100:100	100:100:150
Adag	Nooca A	90	80	70	60
Xoog xajin	MPa	18	14	8.0	7.0
Dheeraynta	%	200	240	260	280
Xoog jeexid	N/mm	70	60	40	30
Laastiga soo laabashada	%	50	52	56	56
Yaraanta	%	0.6	0.5	0.5	0.4
Cufnaanta alaabta kama dambaysta ah	g/cm3	1.13	1.10	1.08	1.07

4.Aasaaska guryaha ≪A50・A40・A30・A20≫

Saamiga isku dhafka	A:B:C	100:100:200	100:100:300	100:100:400	100:100:500
Adag	Nooca A	50	40	30	20
Xoog xajin	MPa	5.0	2.5	2.0	1.5
Dheeraynta	%	300	310	370	490
Xoog jeexid	N/mm	20	13	10	7.0
Laastiga soo laabashada	%	60	63	58	55
Yaraanta	%	0.4	0.4	0.4	0.4
Cufnaanta alaabta kama dambaysta ah	g/cm3	1.06	1.05	1.04	1.03

5.Aasaaska guryaha ≪A10≫

Saamiga isku dhafka	A:B:C	100:100:650
Adag	Nooca A	10
Xoog xajin	MPa	0.9
Dheeraynta	%	430
Xoog jeexid	N/mm	4.6
Yaraanta	%	0.4
Cufnaanta alaabta kama dambaysta ah	g/cm3	1.02

Xusuusin: Guryaha Makaanikada:JIS K-7213.Yaraynta: Qaddarka gudaha.
Xaaladda daawaynta: heerkulka caaryada:600C 600C x 60 min.+ 60°C x 24hrs.+ 250C x 24 saac.
Qalabka jireed ee kor ku taxan waa qiyamka caadiga ah ee lagu cabiro shaybaadhkayaga ee maaha qiyamka qeexida.Marka la isticmaalayo alaabta our, waa in la ogaadaa in sifooyinka jirka ee alaabta kama dambaysta ah kala duwanaan karaan iyadoo ku xiran lafaha maqaalka iyo xaaladda qaabaynta.

6. Iska caabbinta kulaylka, biyaha kulul iyo saliidda ≪A90 ・ A50 ・ A30≫

(1) U adkaysiga kulaylka【Waxaa lagu hayaa 80°C foornada kulaylka leh oo hawo diiran wareegaysa

A90	Shayga	Unug	Madhan	100 saacadood	200 saacadood	500 saacadood
	Adag	Nooca A	88	86	87	86
	Xoog xajin	MPa	18	21	14	12
	Dheeraynta	%	220	240	200	110
	Iska caabin ilmada	N/mm	75	82	68	52
	Xaaladda dusha sare			Isbadal ma jiro	←	←

A60	Shayga	Unug	Madhan	100 saacadood	200 saacadood	500 saacadood
	Adag	Nooca A	58	58	56	57
	Xoog xajin	MPa	7.6	6.1	6.1	4.7
	Dheeraynta	%	230	270	290	310
	Iska caabin ilmada	N/mm	29	24	20	13
	Xaaladda dusha sare			Isbadal ma jiro	←	←

A30	Shayga	Unug	Madhan	100 saacadood	200 saacadood	500 saacadood
	Adag	Nooca A	27	30	22	22
	Xoog xajin	MPa	1.9	1.5	1.4	1.3
	Dheeraynta	%	360	350	380	420
	Iska caabin ilmada	N/mm	9.2	10	6.7	6.0
	Xaaladda dusha sare			Isbadal ma jiro	←	←

Xusuusin: Xaaladda daawaynta: heerkulka caaryada: 600C 600C x 60 min.+ 60°C x 24hrs.+ 250C x 24 saac.
Qalabka jirka waxaa la cabbiraa ka dib marka laga tago muunado qaawan 250C 24 saac.Adag, xoogga jilicsanaanta iyo jeexjeexa Xoogga waxaa lagu tijaabiyaa si waafaqsan JIS K-6253, JIS K-7312 iyo JIS K-7312 siday u kala horreeyaan.

A90	Shayga	Unug	Madhan	100 saacadood	200 saacadood	500 saacadood
	Adag	Nooca A	88	82	83	83
	Xoog xajin	MPa	18	15	15	7.0
	Dheeraynta	%	220	210	320	120
	Iska caabin ilmada	N/mm	75	52	39	26
	Xaaladda dusha sare			Isbadal ma jiro	←	←

A60	Shayga	Unug	Madhan	100 saacadood	200 saacadood	500 saacadood
	Adag	Nooca A	58	55	40	38
	Xoog xajin	MPa	7.6	7.7	2.8	1.8
	Dheeraynta	%	230	240	380	190
	Iska caabin ilmada	N/mm	29	15	5.2	Lama qiyaasi karo
	Xaaladda dusha sare			Isbadal ma jiro	←	dhalaali oo garaac

A30	Shayga	Unug	Madhan	100 saacadood	200 saacadood	500 saacadood
	Adag	Nooca A	27	9	6	6
	Xoog xajin	MPa	1.9	0.6	0.4	0.2
	Dheeraynta	%	360	220	380	330
	Iska caabin ilmada	N/mm	9.2	2.7	0.8	Lama qiyaasi karo
	Xaaladda dusha sare			Taabo	dhalaali oo garaac	←

(3) Iska caabbinta biyaha kulul【Waxa lagu dhex milmay 80°C biyaha tuubada】

A90	Shayga	Unug	Madhan	100 saacadood	200 saacadood	500 saacadood
	Adag	Nooca A	88	85	83	84
	Xoog xajin	MPa	18	18	16	17
	Dheeraynta	%	220	210	170	220
	Iska caabin ilmada	N/mm	75	69	62	66
	Xaaladda dusha sare			Isbadal ma jiro	←	←

A60	Shayga	Unug	Madhan	100 saacadood	200 saacadood	500 saacadood
	Adag	Nooca A	58	55	52	46
	Xoog xajin	MPa	7.6	7.8	6.8	6.8
	Dheeraynta	%	230	250	260	490
	Iska caabin ilmada	N/mm	29	32	29	27
	Xaaladda dusha sare			Isbadal ma jiro	←	←

A30	Shayga	Unug	Madhan	100 saacadood	200 saacadood	500 saacadood
	Adag	Nooca A	27	24	22	15
	Xoog xajin	MPa	1.9	0.9	0.9	0.8
	Dheeraynta	%	360	320	360	530
	Iska caabin ilmada	N/mm	9.2	5.4	4.9	4.2
	Xaaladda dusha sare			Taabo	←	←

(4) Oil iska caabinta【Lagu geliyey 80°C saliid engine】

A90	Shayga	Unug	Madhan	100 saacadood	200 saacadood	500 saacadood
	Adag	Nooca A	88	88	89	86
	Xoog xajin	MPa	18	25	26	28
	Dheeraynta	%	220	240	330	390
	Iska caabin ilmada	N/mm	75	99	105	100
	Xaaladda dusha sare			Isbadal ma jiro	←	←

A60	Shayga	Unug	Madhan	100 saacadood	200 saacadood	500 saacadood
	Adag	Nooca A	58	58	57	54
	Xoog xajin	MPa	7.6	7.9	6.6	8.0
	Dheeraynta	%	230	300	360	420
	Iska caabin ilmada	N/mm	29	30	32	40
	Xaaladda dusha sare			Isbadal ma jiro	←	←

A30	Shayga	Unug	Madhan	100 saacadood	200 saacadood	500 saacadood
	Adag	Nooca A	27	28	18	18
	Xoog xajin	MPa	1.9	1.4	1.6	0.3
	Dheeraynta	%	360	350	490	650
	Iska caabin ilmada	N/mm	9.2	12	9.5	2.4
	Xaaladda dusha sare			Barar	←	←

(5) Saliida iska caabbinta【Batrool lagu shubay】

A90	Shayga	Unug	Madhan	100 saacadood	200 saacadood	500 saacadood
	Adag	Nooca A	88	86	85	84
	Xoog xajin	MPa	18	14	15	13
	Dheeraynta	%	220	190	200	260
	Iska caabin ilmada	N/mm	75	60	55	41
	Xaaladda dusha sare			Barar	←	←

A60	Shayga	Unug	Madhan	100 saacadood	200 saacadood	500 saacadood
	Adag	Nooca A	58	58	55	53
	Xoog xajin	MPa	7.6	5.7	5.1	6.0
	Dheeraynta	%	230	270	290	390
	Iska caabin ilmada	N/mm	29	28	24	24
	Xaaladda dusha sare			Barar	←	←

A30	Shayga	Unug	Madhan	100 saacadood	200 saacadood	500 saacadood
	Adag	Nooca A	27	30	28	21
	Xoog xajin	MPa	1.9	1.4	1.4	0.2
	Dheeraynta	%	360	350	380	460
	Iska caabin ilmada	N/mm	9.2	6.8	7.3	2.8
	Xaaladda dusha sare			Barar	←	←

(6)Cabsiga kiimikada

Kiimikada	Adag	Luminta dhalaalka	Midab-ka-baxa	dildilaac	Warpa ge	Barar ing	Degra shukaansi	Kala dirid
Biyo nadiif ah	A90	○	○	○	○	○	○	○
	A60	○	○	○	○	○	○	○
	A30	○	○	○	○	○	○	○
10% Sulfuric acid	A90	○	○	○	○	○	○	○
	A60	○	○	○	○	○	○	○
	A30	○	○	○	○	○	○	○
10% Hydrochloric acid	A90	○	○	○	○	○	○	○
	A60	○	○	○	○	○	○	○
	A30	△	○	○	○	○	○	○
10% Sodium hydroxide	A90	○	○	○	○	○	○	○
	A60	○	○	○	○	○	○	○
	A30	△	○	○	○	○	○	○
10% Ammonia biyo	A90	○	○	○	○	○	○	○
	A60	○	○	○	○	○	○	○
	A30	○	△	○	○	○	○	○
Acetone*1	A90	○	○	○	○	○	○	○
	A60	△	○	○	×	○	○	○
	A30	△	○	○	×	○	○	○
Toluene	A90	○	○	○	×	△	○	○
	A60	○	○	○	×	×	○	○
	A30	○	○	×	×	×	○	○
Methylene koloriin*1	A90	○	○	○	×	○	○	○
	A60	△	○	○	×	△	○	○
	A30	△	○	○	×	△	○	○
Ethyl acetate*1	A90	△	○	○	○	○	○	○
	A60	△	○	○	×	○	○	○
	A30	△	○	○	×	○	○	○
Ethanol	A90	○	○	○	×	○	○	○
	A60	△	○	○	×	△	○	○
	A30	△	○	○	×	×	○	○

Xusuusin: Isbeddellada 24 saac ka dib.ku-mirsanaanta kiimikooyin kasta ayaa la arkay.Kuwa lagu calaamadeeyay * 1 sumadda ayaa la dhex geliyay 15 daqiiqo.siday u kala horreeyaan.

8. Habka Wax-qabashada Vacuum

(1) Miisaanka
Go'aanso qaddarka "Qaybta C" iyadoo loo eegayo adkaanta aad rabto oo ku dar qaybta A.
Ku miisaan isla qaddarka qaybta B sida qaybta A ee koob gaar ah iyadoo la tixgalinayo cadadka ku hadhay koobka.

(2) Ka-hor-istaagga
Ku samee nadiifinta hore ee qolka qashinka ilaa 5 daqiiqo.
Ku dar inta aad u baahan tahay.
Waxaan kugula talineynaa in aad biyo ku shubto ka dib kuleylka kuleylka heerkulka dareeraha ah ee 25 ~ 35 ° C.

(3) Heerkulka xabagta
Iska ilaali heerkulkare of25 ~ 35°C waayo labadaba A(ka kooban C qayb) iyo B qayb.
Marka heerkulka maaddadu uu sarreeyo, nolosha dheriga ee isku dhafka ah waxay noqon doontaa mid gaaban oo marka heerkulka maaddadu hoos u dhacdo, nolosha dheriga ee isku dar ah ayaa noqon doonta mid dheer.

(4) heerkulka caaryada
Heerkulka caaryada silikoon horay u sii kulayl 60 ~ 700C.
Heerkulka caaryada aadka u hooseeya ayaa laga yaabaa inay keento daaweyn aan habboonayn si ay u keento astaamo jireed oo hooseeya.Heerkulka caaryada waa in si sax ah loo xakameeyaa maadaama ay saameynayaan saxnaanta cabbirka maqaalka.

(5) Jilidda
Koonteennarada waxaa loo dejiyay qaab sidaas ahB qayb is ayaa lagu daray to A qayb (coxajinta C qayb).
Marso vacuum qolka oo ka saar gaaska A qayb 5 ~ 10 daqiiqo ahhalka it is kiciyey marba marka ka dambaysa.
Ku dar B qayb to A qayb(ka kooban C qayb)oo walaaq 30 ~ 40 ilbiriqsi ka dibna isku darka si degdeg ah ugu tuur caaryada silikoon.
Ku sii daa faakiyuumka 1 iyo nus daqiiqo ka dib bilawga isku darka.

(6) Xaalad caafimaad
Ku rid caaryada ka buuxa foornada heerkulbeegga ah 60 ~ 700C 60 daqiiqo nooca A adkaanta 90 iyo 120 daqiiqo Nooca A adagaanta 20 iyo dumin.
Ku samee daawaynta ka dib 600C 2 ~ 3 saacadood iyadoo ku xidhan shuruudaha.

9. Jaantuska socodka ee shubista vacuum

10. Taxadarrada xagga maaraynta

(1) Maadaama dhammaan qaybaha A, B iyo C ay u nugul yihiin biyaha, marna ha u oggolaan in biyuhu galaan walxaha.Sidoo kale iska ilaali walxaha soo socda taabashada dheer ee qoyaanka.Si adag u xidh weelka isticmaal kasta ka dib.

(2) Gelitaanka biyaha ee qayb ka mid ah A ama C waxay u horseedi kartaa abuuritaanka xumbo badan oo hawo ah oo ku jirta alaabta la daweeyay haddii ay taasi dhacdo, waxaanu ku talinaynaa in lagu kululeeyo qaybta A ama C ilaa 80 ° C oo ku shub biyo faaruq ah ilaa 10 daqiiqo.

(3) Qaybtu way barafoobaysaa heerkul ka hooseeya 15°C.Kuleyl ilaa 40 ~ 50 ° C oo isticmaal ka dib markaad si fiican u ruxdo.

(4) Qaybta B waxay la falgali doontaa qoyaan si ay u noqdaan kuwo qallafsan ama si ay u daaweeyaan walxo adag.Ha isticmaalin walaxda marka ay lumiso daah-furnaanta ama ay muujisay wax adag sababtoo ah alaabtani waxay u horseedi doontaa sifooyin jireed oo aad u hooseeya.

(5) Kulaylinta muddada dheer ee qaybta B ee heerkulka ka sarreeya 50 ° C waxay saameyn doontaa tayada qaybta B iyo gasacadaha waxaa lagu buufin karaa cadaadiska gudaha oo kordhay.Ku kaydi heerkulka qolka.

11. Taxadirrada Badbaadada iyo Nadaafadda

(1) Qaybta B waxay ka kooban tahay in ka badan 1% ee 4,4'-Diphenylmethane diisocyanate.Ku rakib qiiqa maxaliga ah gudaha dukaanka shaqada si aad u hubiso hawo wanaagsan oo hawada ah.

(2) Ka taxadar in gacmaha ama maqaarka aysan si toos ah ula xiriirin alaabta ceeriin.Haddii ay dhacdo in la taabto, ku dhaq saabuun iyo biyo isla markiiba.Waxa laga yaabaa inay ka xanaajiso gacmaha ama maqaarka haddii ay taabtaan alaabta ceeriin muddo dheer.

(3) Haddii alaabta ceeriin ay gasho indhaha, ku raaci biyo qulqulaya 15 daqiiqo oo wac dhakhtar.

(4) Ku rakib tuubbada matoorka si aad u hubiso in hawadu daalan tahay bannaanka dukaanka shaqada.

12. Kala soocida walxaha khatarta ah sida uu qabo sharciga adeegyada dab-demiska

Qayb ka mid ah: Kooxda Saddexaad ee Batroolka, Qalabka Khatarta ah Kooxda Afraad.

Qaybta B: Kooxda Afraad ee Batroolka, Qalabka Khatarta ah Kooxda Afraad.

Qaybta C: Kooxda Afraad ee Batroolka, Qalabka Khatarta ah Kooxda Afraad.