Idealis partibus rigidis et functionalibus MJF Niger HP PA12GB

Descriptio Brevis:

HP PA 12 GB est pulvis polyamidicus globulis vitreis repletus, qui ad imprimendas partes functionales robustas cum bonis proprietatibus mechanicis et alta re-usabilitate adhiberi potest.

Colores Disponibiles

Cinereus

Processus Post-Disponibilis

Tinctio

Mitte nobis inscriptionem electronicam Schedae Datorum Deprehensae

Detalia Producti

Etiquettae Productarum

Commoda

Altae fortitudinis

Impressiones dimensionaliter stabiles sunt

Stabilitas dimensionalis una cum repetibilitate

Applicationes Ideales

Aerospatiale

Instrumenta electronica domestica

Autocinetum

Auxilium medicum

Ars et artificium

Architectura

Scheda Datorum Technica

Categoria	Mensura	Valor	Methodus
Proprietates generales	Punctum liquefactionis pulveris (DSC)	186° C / 367° F	ASTM D3418
	Magnitudo particularum	58 μm	ASTM D3451
	Densitas pulveris	0.48 g/cm³/0.017 lb/in³	ASTM D1895
	Densitas partium	1.3 g/cm³/0.047 lb/in³	ASTM D792
Proprietates mechanicae	Robur tensile, onus maximum 7, XY, XZ, YX, YZ	30 MPa/4351 psi	ASTM D638
	Robur tensile, onus maximum 7, ZX, XY	30 MPa/4351 psi	ASTM D638
	Modulus tensilis 7, XY, XZ, YX, YZ	2500 MPa/363 ksi	ASTM D638
	Modulus tensilis 7, ZX, XY	2700 MPa/392 ksi	ASTM D638
	Elongatio ad fracturam 7, XY, XZ, YX, YZ	10%	ASTM D638
	Elongatio ad fracturam 7, ZX, XY	10%	ASTM D638
	Robur flexurale (@ 5%), 8 XY, XZ, YX, YZ	57.5 MPa/8340 psi	ASTM D790
	Robur flexurale (@ 5%),8 ZX, XY	65 MPa/9427 psi	ASTM D790
	Modulus flexuralis, 8 XY, XZ, YX, YZ	2400 MPa/348 ksi	ASTM D790
	Modulus flexuralis, 8 ZX, XY	2700 MPa/392 ksi	ASTM D790
	Izod incisum ad ictum (@ 3.2 mm, 23ºC), XY, XZ, YX, YZ, ZX, ZY	3 KJ/m²	ASTM D256Methodus Probationis A
	Duritia Shore D, XY, XZ, YX, YZ, ZX, ZY	82	ASTM D2240
Proprietates thermales	Temperatura deflexionis caloris (@ 0.45 MPa, 66 psi), XY, XZ, YX, YZ	174° C/345° F	ASTM D648Methodus Probationis A
	Temperatura deflexionis caloris (@ 0.45 MPa, 66 psi), ZX, XY	175° C / 347° F	ASTM D648Methodus Probationis A
	Temperatura deflexionis caloris (@ 1.82 MPa, 264 psi), XY, XZ, YX, YZ	114° C/237° F	ASTM D648Methodus Probationis A
	Temperatura deflexionis caloris (@ 1.82 MPa, 264 psi), ZX, XY	120° C/248° F	ASTM D648Methodus Probationis A
Reusabilitas	Minima ratio renovationis ad stabilem functionem	30%
Conditiones ambientales commendatae	Humiditas relativa commendata	50-70% RH
Certificationes	UL 94, UL 746A, RoHS, 9 REACH, PAHs