Ubume boMphezulu oLungileyo kunye nokuqina okuhle kwe-SLA ABS njenge-White Resin KS408A

Ubume boMphezulu oLungileyo kunye noBulukhuni obulungileyo be-SLA ABS njenge-White Resin KS408A Umfanekiso obonakalisiweyo

Inkcazelo emfutshane:

Material Overview

I-KS408A yeyona resin idumileyo ye-SLA yeendawo ezichanekileyo, ezineenkcukacha, ezilungele ukuvavanya uyilo lwemodeli yokuqinisekisa ubume obufanelekileyo kunye nomsebenzi phambi kokuveliswa ngokupheleleyo.Ivelisa i-ABS emhlophe njengeendawo ezineempawu ezichanekileyo, ezihlala ixesha elide kunye nokumelana nokufuma.Ilungele iprototyping kunye novavanyo olusebenzayo, ukonga ixesha, imali kunye nezinto eziphathekayo ngexesha lophuhliso lwemveliso.

Thumela i-imeyile kuthi Ukukhuphela iPhepha leDatha

Iinkcukacha zeMveliso

Iithegi zeMveliso

Inzuzo

-Uchaneke kakhulu kwaye ukuqina olomeleleyo

- Ihlala ixesha elide

- Ubume obucokisekileyo bomphezulu

- Ukuxhathisa okulungileyo kokufuma

- Kulula ukucoca kunye nokugqiba

Izicelo ezifanelekileyo

- Iiprototypes ezisebenzayo

- Iimodeli zeengcinga

- Iimodeli zokuvelisa umthamo ophantsi

-Izithuthi, i-aerospace, i-architecture, izicelo ze-elektroniki

Iphepha leDatha lobuGcisa

Iipropati zolwelo		IiPropathi zokubona
Imbonakalo	I-Opaque White	Dp	0.135-0.155 mm
Viscosity	355-455 cps @ 28 ℃	Ec	9-12 mJ/cm2
Ukuxinana	1.11-1.14g/cm3 @ 25 ℃	Ubungqingqwa bomaleko wokwakha	0.05~0.15mm

IiPropati zoomatshini		UV Postcure
UMLINGANISO	INDLELA YOVAVANYO	VALUE
Ukuqina , Unxweme D	I-ASTM D 2240	76-82
Flexural modulus , Mpa	I-ASTM D 790	2,690-2,775
Amandla e-Flexural, uMpa	I-ASTM D 790	68- 75
Imodyuli yokuqina , MPa	I-ASTM D 638	2,180-2,395
Amandla okuqina, MPa	I-ASTM D 638	27-31
Ukwandisa ngexesha lekhefu	I-ASTM D 638	12 -20%
Amandla empembelelo, inotched lzod, J/m	I-ASTM D 256	58 - 70
Ubushushu bokutshintsha ubushushu, ℃	I-ASTM D 648 @66PSI	55-65
Utshintsho lweglasi, Tg	DMA, E”incopho	55-70
Ubuninzi , g/cm3		1.14-1.16