I-3D edumileyo Shicilela i-SLA Resin ABS njengeBrown KS908C

Ushicilelo lwe-3D oludumileyo lwe-SLA Resin ABS njengeBrown KS908C Umfanekiso obonakalayo

Inkcazelo emfutshane:

Material Overview

I-KS908C ngumbala omdaka we-SLA weresin yeendawo ezichanekileyo nezineenkcukacha. Ngokwakheka okucokisekileyo, ukumelana nobushushu kunye nokomelela okuhle, i-KS908C iphuhliselwe ngokukodwa ukuprinta imaquette yesihlangu kunye neemodeli ezibalaseleyo zesihlangu, kunye nokungunda okukhawulezayo kwePU sole, kodwa iyathandwa ngamazinyo, ubugcisa kunye noyilo, umfanekiso oqingqiweyo, oopopayi kunye nefilimu.

Thumela i-imeyile kuthi Ukukhuphela iPhepha leDatha

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iingenelo

- ichaneke kakhulu

- Ubume obucokisekileyo bomphezulu

- Iikona ezicacileyo kunye neekona

- Ukuxhathisa okulungileyo kokufuma

Izicelo ezifanelekileyo

- Iimodeli zezihlangu

- Amazinyo

-Ubugcisa kunye noyilo

- Umfanekiso oqingqiweyo

-Ifilimu yoopopayi

Iphepha leDatha lobuGcisa

Iipropati zolwelo		IiPropathi zokubona
Imbonakalo	Ntsundu	Dp	0.135-0.155 mm
Viscosity	405-505 cps @ 28 ℃	Ec	9-12 mJ/cm2
Ukuxinana	1.11-1.14g/cm3 @ 25 ℃	Ubungqingqwa bomaleko wokwakha	0.1-0.15mm

IiPropati zoomatshini		UV Postcure
UMLINGANISO	INDLELA YOVAVANYO	VALUE
Ukuqina , Unxweme D	I-ASTM D 2240	74-80
Flexural modulus , Mpa	I-ASTM D 790	2,650-2,750
Amandla e-Flexural, uMpa	I-ASTM D 790	60- 75
Imodyuli yokuqina , MPa	I-ASTM D 638	2,150-2,370
Amandla okuqina, MPa	I-ASTM D 638	25-30
Ukwandisa ngexesha lekhefu	I-ASTM D 638	12 -20%
Amandla empembelelo, inotched lzod, J/m	I-ASTM D 256	58 - 70
Ubushushu bokutshintsha ubushushu, ℃	I-ASTM D 648 @66PSI	58-68
Utshintsho lweglasi, Tg	DMA, E”incopho	55-70
Ubuninzi , g/cm3		1.14-1.16