Uru
Nnukwu okpomọkụ na-eguzogide
Nkwụsi ike akụkụ dị mma
Ike dị elu na izi ezi
Ngwa dị mma
Prototypes chọrọ nguzogide oke ọkụ
Ngwa ngwa ebu
Nka na ụzụ data-akwụkwọ
| Njirimara Liquid | Ngwa anya | |||
| Ọdịdị | Ọkara translucent | Dp | 13.5mJ/cm2 | [mkpughe dị mkpa] |
| Viscosity | 340 cps @ 30 ℃ | Ek | 0.115 mm | [slope of cure-depth vs. Na (E) mgbanaka] |
| Njupụta | 1.14 g/cm3 | Ụlọ oyi akwa ọkpụrụkpụ | 0.08-0.12 mm | |
| Ngwa igwe | UV post ọgwụgwọ | |||
| Nwalee ihe | Ụzọ ule | Ọnụọgụ ọnụọgụgụ | Ụzọ ule | Ọnụọgụ ọnụọgụgụ |
| Ike ọdụdọ | ASTMD 638 | 65MPa | GB/T1040.1-2006 | 71MPa |
| Elongation na ezumike | ASTMD 638 | 3-5% | GB/T1040.1-2006 | 3-5% |
| Ike na-ehulata | ASTMD 790 | 110MPa | GB/ T9341-2008 | 115MPa |
| Mgbanwe mgbanwe | ASTMD 790 | 2720MPa | GB/ T9341-2008 | 2850MPa |
| Izod achọpụtala ike mmetụta | ASTMD 256 | 20J/m | GB/T1843-2008 | 25J/m |
| Ike ike mmiri | ASTMD 2240 | 87D | GB/T2411-2008 | 87D |
| Igwe mgbanwe okpomọkụ | DMA, tan θ kacha elu | 135 ℃ | ||
| Ọnụọgụ mgbasawanye okpomọkụ (25-50 ℃) | ASTME831-05 | 50 µ m/m℃ | GB/T1036-89 | 50 µ m/m℃ |
| Ọnụọgụ mgbasawanye thermal (50-100 ℃) | ASTME831-05 | 150 µ m/m℃ | GB/T1036-89 | 160µ m/m℃ |
Na-atụ aro okpomọkụ maka nhazi na nchekwa nke resin n'elu kwesịrị 18 ℃-25 ℃.
1e aoned te tcreo orertlroleoep ndecerece.rhe syes d wbah ma ey dpnton nbirdualrmathrero.srg reorot-rg rcices.The shet es gie in aboe sfor niometon purpsis ry andovs rot cortitutealeall bnig MSLS.
