I-SLA Resin Rubber njenge-White ABS njenge-KS198S

I-SLA Resin Rubber efana ne-White ABS efana ne-KS198S Umfanekiso obonakalayo

Inkcazelo emfutshane:

Material Overview
I-KS198S yintlaka emhlophe, eguquguqukayo ye-SLA eneempawu zokuqina okuphezulu, ukuqina okuphezulu kunye nokuchukumisa okuthambileyo.Ilungele ukuprinta iprototype yezihlangu, ukusonga irabha, imodeli yebhayoloji kunye nezinye iirubha ezifana neendawo.

Thumela i-imeyile kuthi Ukukhuphela iPhepha leDatha

Iinkcukacha zeMveliso

Iithegi zeMveliso

Inzuzo

- Ukuba bhetyebhetye okuphezulu

- Ukuxhathisa okulungileyo kweenyembezi

- ichaneke kakhulu

- Umbala omhlophe ogqwesileyo

Izicelo ezifanelekileyo

- Izihlangu

- Iiprototypes zifuna irabha efana nemathiriyeli

- Iimodeli zokubonisa ezimhlophe ezithambileyo

Iipropati zolwelo

Imbonakalo	Mhlophe	Dp	13.5 mJ/cm2	[Ukuvezwa okubalulekileyo]
Viscosity	560 cps@30℃	Ec	0.125 mm	[ithambeka lobunzulu bonyango vs. Ku (E) igophe]
Ukuxinana	1.1 g/cm3	Ubungqingqwa bomaleko wokwakha	0.08-0.12 mm

IiPropati zoomatshini		UV Postcure
UMLINGANISO	INDLELA YOVAVANYO	VALUE
Ukuqina , Unxweme D	I-ASTM D 2240	72-78
Flexural modulus , Mpa	I-ASTM D 790	2,680-2,775
Amandla e-Flexural, uMpa	I-ASTM D 790	65- 75
Imodyuli yokuqina , MPa	I-ASTM D 638	2,170-2,385
Amandla okuqina, MPa	I-ASTM D 638	25-30
Ukwandisa ngexesha lekhefu	I-ASTM D 638	12 -20%
Amandla empembelelo, inotched lzod, J/m	I-ASTM D 256	58 - 70
Ubushushu bokutshintsha ubushushu, ℃	I-ASTM D 648 @66PSI	50-60
Utshintsho lweglasi, Tg	DMA, E”incopho	55-70
Ubuninzi , g/cm3		1.14-1.16

Ubushushu obucetyiswayo bokulungiswa kunye nokugcinwa kweresin engentla kufuneka ibe yi-18℃-25℃.
1e aoned te tcreo orertlroleoep ndecerece.rhe syes d wbah ma ey dpnton nbirdualrmathrero.srg reorot-rg rcices.

Ngaphambili: Okugqwesileyo kokuNgaphandle kwe-SLA Resin PMMA njenge-KS158T2e

Okulandelayo: Amandla aphezulu kunye nokuqina okuqinileyo kwe-ABS njenge-SLA Resin Light Yellow KS608A