Kenyelletso ea Plastiki ea CNC
Ka tlhahiso ea CNC, mechine e sebelisoa ke taolo ea linomoro, moo mananeo a software a abetsoeng ho laola lintho.Puo e ka morao ea machining ea CNC, e tsejoang hape e le G code, e sebelisoa ho laola mekhoa e fapaneng ea mochini o tsamaisanang, joalo ka lebelo, sekhahla sa phepelo le khokahano.Ho na le lisebelisoa tse ngata tse fumanehang (Plastiki) ho CNC Machining, tse tloaelehileng le ABS, PMMA, PC, POM, PP, Nylon, PTFE, Bakelite, lisebelisoa tsena li ka fuoa moreki hore a khethe ho JS Additive, Ho bonolo ho sebetsa ka potlako likarolo tsa polasetiki. kapa lihlahisoa tse ling bakeng sa mokhoa oa CNC Machining.
Mona ke kamoo e sebetsang kateng.
Taolo ea linomoro tsa khomphutha (CNC) ke mokhoa oa tlhahiso oo ho ona software e reriloeng esale pele e laolang ts'ebetso ea lisebelisoa le mochini femeng.Mokhoa ona o ka sebelisoa ho laola mefuta e mengata ea mechine e rarahaneng, ho tloha ho li-grinders le lathes ho ea ho mechine ea ho sila le li-routers tsa CNC.Ka thuso ea machining ea CNC, mesebetsi ea ho itšeha ka mahlakore a mararo e ka phethoa ka likeletso tse ngata feela.Melemo
- 1.CNC e na le katleho e phahameng ea tlhahiso tabeng ea mefuta e mengata ea mefuta-futa le e nyenyane ea tlhahiso ea lihlahisoa, e ka fokotsang nako ea ho lokisetsa tlhahiso, ho lokisa lisebelisoa tsa mochine le tlhahlobo ea ts'ebetso, le ho fokotsa nako ea ho itšeha ka lebaka la tšebeliso ea palo e ntle ka ho fetisisa ea ho itšeha.
- 2.Boleng ba mechine ea CNC bo tsitsitse, ho nepahala ha mechine ho phahame, 'me ho pheta-pheta ho phahame, e leng se loketseng litlhoko tsa machining tsa lifofane.
- Mechine ea 3.CNC e ka sebetsana le libaka tse rarahaneng tseo ho leng thata ho li sebetsana le mekhoa e tloaelehileng, 'me e ka ba ea sebetsana le likarolo tse ling tse sa bonahaleng tsa machining.
Mefokolo
- Litlhoko tse phahameng tsa tekheniki bakeng sa basebetsi le basebetsi ba tlhokomelo ea mochini.
- Theko ea theko ea thepa ea mochini e theko e boima.
Liindasteri tse nang le Plastiki ea Machining ea CNC
Theknoloji ea CNC Machining e sebelisoa haholo mefuteng eohle ea mechine ea matla, mechine ea ho phahamisa le ea lipalangoang, mechine ea temo, metallurgy le mechine ea merafo, mechine ea lik'hemik'hale, mechine ea masela, lisebelisoa tsa mochine, lisebelisoa, lisebelisoa, limithara le lisebelisoa tse ling tsa tlhahiso ea mechine le lisebelisoa.
Post Processing
Bakeng sa lisebelisoa tse ngata tsa polasetiki, mona ke mekhoa ea ts'ebetso ea poso e fumanehang ho tsoa ho JS Additive.
CNC Machining Plastic Materials
JS Addive/ProvidCNC Mho opaLisebelisoa tsa polasetiki: ABS, PMMA, PC, POM, PP, Nylon, PTFE, Bakelite.
Ts'ebeletso e ntle ka ho fetisisa ea CNC Machining Plastic Technique ho tsoa ho JS Additive.
| CNC | Mohlala | Mofuta | Mmala | Theknoloji | Botenya ba lera | Likaroloana |
 | ABS | / | / | CNC | 0.005-0.05mm | Matla a matle, a ka kopanngoa, a ka behoa ho likhato tse 70-80 ka mor'a ho fafatsa |
 | PMMA | / | / | CNC | 0.005-0.05mm | Ponaletso e ntle, e ka kopanngoa, e ka behoa ho likhato tse ka bang 65 ka mor'a ho fafatsa |
 | PC | / | / | CNC | 0.005-0.05mm | Ho hanyetsa mocheso ho pota-potile likhato tse 120, ho ka kopanngoa le ho fafatsoa |
| POM | / | / | CNC | 0.005-0.05mm | Thepa e phahameng ea mochini le khanyetso ea creep, insulation e ntle ea motlakase, khanyetso ea solvent le ts'ebetso |
 | PP | / | / | CNC | 0.005-0.05mm | Matla a phahameng le toughness e ntle, e ka fafatsoa |
 | Nylon | PA6 | / | CNC | 0.005-0.05mm | Matla a phahameng le ho hanyetsa mocheso, le toughness e ntle |
 | PTFE | / | / | CNC | 0.005-0.05mm | Botsitso bo botle ba lik'hemik'hale, ho hanyetsa kutu, ho tiisa, mocheso o phahameng le mocheso o tlase |
 | Bakelite | / | / | CNC | 0.005-0.05mm | Ho hanyetsa mocheso o babatsehang, ho hanyetsa lelakabe, ho hanyetsa metsi le ho kenya letsoho |