Izinzuzo
- Inembile kakhulu
- Fine surface texture
- Sula imiphetho namakhona
- Ukumelana okuhle komswakama
Izicelo Ezikahle
- Amamodeli ezicathulo
- Amazinyo
- Ubuciko kanye nomklamo
- Isifanekiso
- Animation ifilimu
Ishidi ledatha yezobuchwepheshe
| I-Liquid Properties | Izakhiwo ze-Optical | ||
| Ukubukeka | Brown | I-Dp | 0.135-0.155 mm |
| I-Viscosity | 405-505 cps @ 28 ℃ | Ec | 9-12 mJ/cm2 |
| Ukuminyana | 1.11-1.14g/cm3 @ 25 ℃ | Ugqinsi lwesendlalelo sokwakha | 0.1-0.15mm |
| Izakhiwo Zemishini | I-UV Postcure | |
| ISILINGANISO | INDLELA YOKUHLOLA | VALUE |
| Ukuqina , Shore D | I-ASTM D 2240 | 74-80 |
| Flexural modulus , Mpa | I-ASTM D790 | 2,650-2,750 |
| Amandla e-Flexural , Mpa | I-ASTM D790 | 60-75 |
| I-tensile modulus, i-MPa | I-ASTM D638 | 2,150-2,370 |
| Amandla aqinile, i-MPa | I-ASTM D638 | 25-30 |
| Elongation ngesikhathi sekhefu | I-ASTM D638 | 12 -20% |
| Amandla omthelela, i-notched lzod, J/m | I-ASTM D 256 | 58-70 |
| Izinga lokushisa lokuphambuka kokushisa, ℃ | I-ASTM D 648 @66PSI | 58-68 |
| Ukuguqulwa kwengilazi, Tg | I-DMA, E”peak | 55-70 |
| Ukuminyana , g/cm3 | 1.14-1.16 | |
Izinga lokushisa elinconyiwe lokucubungula nokugcinwa kwe-resin engenhla kufanele libe ngu-18℃-25℃.
1e aoned te tcreo orertlroleoep ndecerece.rhe syes d wbah ma ey dpnton nbirdualrmathrero.srg reorot-rg rcices.I-shet es gie in aboe sfor niometon purpsis ry andovs rot cortitutealeal bnig MS.
-
I-SLA Resin Rubber njenge-White ABS njenge-KS198S
-
I-Fine Surface Texture & Good Hardness SLA A...
-
Okuhle Kakhulu Okungafihli kwe-SLA Resin PMMA njenge-KS158T
-
Amandla Aphezulu Nokuqina Okuqinile kwe-ABS efana ...
-
I-High Temperature Ressitance SLA Resin ABS efana ...
-
Ukuminyana Okuphansi kodwa Amandla Aphakeme Ngokuqhathaniswa ne-SLM Al...









